Fosser FA 13 is a premium radiator corrosion inhibitor and anti-freeze agent based on ethylene glycol, with highly effective inhibitors combining OAT and silicate technology as well as high-performance additives. It ensures maximum long-term protection of all metal components in the motor. The product does not have any negative effect on coolant hoses or cylinder head gaskets.
Fosser FA 13 – mixed with the correct amount of water – can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these metals, and radiator systems made in aluminium or copper alloys. Fosser FA 13 is particularly recommended for high-tech engines that require special high-temperature protection for aluminium components. We recommend maintaining a concentration of 50% (v/v) during all seasons. Fosser FA 13 can be mixed with most coolants based on ethylene glycol.
Caution: Observe manufacturer instructions. Minimum concentration: 33 % (v/v).
Recommendations*: VW TL 774 J, Audi, Bentley, Bugatti, Lamborghini, Seat/ Skoda
| FOSSER Antifreeze FA 13 | Patr Water | Frost resistance until: |
| 1 | 2 | -18°C |
| 1 | 1,5 | -24°C |
| 1 | 1 | -36°C |
| TYPICAL VALUES | METHOD | UNIT | FOSSER Antifreeze FA 13 |
| Density at 20°C | ASTM D 5931 | g/cm3 | 1,132 |
| Reserve alkalinity (pH 5.5) | ASTM D 1121 | ml 0,1 n HCI | 5,7 |
| Boiling point | ASTM D 1120 | °C | >170 |
| pH | ASTM D 1287 | – | 8,6 |
| COC flash point | DIN EN ISO 2592 | °C | >120 |
| Frost protection at 50% (v/v) | ASTM D 1177 | °C | -36 |
| Colour | – | – | violet |
The above values may vary within commercially accepted tolerances.
* Meets the requirements of the OEM manufacturer.
₪55.00
